During the processing of stainless steel metal products in Ruiquan Jinan, in order to ensure the quality of the processing, we rely on the experience accumulated by technical personnel to make judgments. There are still many factors that endanger the production and processing quality, and there is a certain amount of attention during the processing. Let's take a look together.
1. Technicians need to use specific laser power densities for various materials, and the cutting amount should comply with the laws of empirical formulas. As long as the cutting speed exceeds the threshold, the cutting speed of the raw material is positively correlated with the laser power density. In other words, increasing the power can improve the cutting speed.
2. The power we refer to here is not only related to the laser power, but also to the beam quality mode. In addition, the characteristics of the light focusing system, namely the size of the light spot after focusing, also have a significant impact on laser cutting. The cutting speed is inversely proportional to the density (proportion) and wall thickness of the raw material being laser cut.
3. When other main parameters do not change in laser cutting, the influencing factors for increasing cutting amount include: increasing output power (within a certain range, such as 500-2000W); Improve lighting methods; Reduce the size of the focal point (such as focusing with a short lens focal length lens); Laser cutting of raw materials with low original volatile energy (such as plastic, organic glass board, etc.); Laser cutting of raw materials with relatively low relative density (such as white pine); Laser cutting of thin raw materials.